SYSTEM «ASGIMS», «ATRSGIMS» | SSPE «CORPORATION KOMMUNAR»

Printable version

Over 50 years our enterprise has been working in the field of developing calibration-control and testing equipment for goods of space industry. On the base of experience of developing goods of electronic equipment we have designed multi-channel strain gage measuring system, which is operating on the stand of strength tests of aero structures of ANTK «Antonov».

AUTOMATION STRAIN GAGE

INFORMATION-MEASURING SYSTEM (ASGIMS)

It is intended for research and determination of deflected mode of structures by processing measuring results.

SPECIFICATIONS

Number of control points of one measuring channel (with one active resistor-strain sensor) 100

Number of measuring channels (on the customer's request) 1 to 128

Total time of inquiry cycle, measuring and transferring results to computer to all operative channels, c max 8

Rated price unit of low order digit of measuring value code, mkOhm/Ohm max 4

Basic reduced error of measurement, % max 0,2

Range of working temperature, °C +5 to +35

Communication line length

from resistor-strain sensors to commutators, m to 10

from commutators to measuring device, m to 40

from measuring device to computer, m to 100

Overall dimensions

measuring device, mm 480x450x355

commutator with 100 measuring points, mm 390x170x115

The system provides diagnostic troubleshooting till replaceable block, as well as diagnostic troubleshooting of the control object sensors.

Specified system life is no less than 5000 hours within set service life of 10 years.

The system is certified by certificate of state metrological qualification. It is possible to supply system as per individual project. We perform service supporting within the whole operation period.

AUTOMATION THIN-ROUTE STRAIN GAGE

INFORMATION-MEASURING SYSTEM (ATRSGIMS)

It is intended for researching deflected mode of natural structures under affecting of static and dynamic loads with digital processing measurement results.

Basic specifications of configuration for static testing:

Number of control points of one measuring channel
when switching on resistor-strain sensors as per circuit 1/4 bridge	100
when switching on resistor-strain sensors as per circuit 1/2 bridge or bridge	50
Total time of inquiry cycle, measuring and transferring results to computer to all operative channels, c	Max 8
Rated price unit of low order digit of measuring value code, mkOhm/Ohm	Max 4
Basic reduced error of measurement, %	Max 0,2
Communication line length
from resistor-strain sensors to commutators, m	to 10
from commutators to measuring device, m	to 40

Basic specifications of configuration for dynamic testing:

Maximum number of measuring channels when switching on resistor-strain sensors as per circuit 1/2bridge or bridge and loading frequency of the structure
0 to 50 Hz	4
0 to 200 Hz	2
0 to 1000 Hz	1
Range of registry of loading frequency of the structure
at work with preliminary information accumulation, Hz	0 to 1000
at work with information transfer in real time scale, Hz	0 to 100
Basic reduced error of measurement (static), %	Max 2
Maximum time for preliminary information accumulation, c	Max 3600
Communication line length from resistor-strain sensors to measuring device
when switching on resistor-strain sensors as per circuit 1/2 bridge, m	to 10
when switching on resistor-strain sensors as per circuit bridge, m	to 70
System is serviceable in a range of working temperature, °C	+5 to +35
Communication line length from measuring device to computer, m	to 100

The system provides diagnostic troubleshooting till replaceable block, as well as diagnostic troubleshooting of the control object sensors.

In base model it is possible to install 4 measuring modules in any configuration.

Specified system life is no less than 5000 hours within set service life of 10 years.

Service support within the whole operation period is guaranteed..

NEWS

2008-11-01    2008 - the prototype of GMA (Grade Metal Analyzer ) has been produced.

2008-10-21    21.10.2008 - 23.10.2008 the Delegation of SSPE «Corporation Komunar» took part in the exhibition «Expo Welding-2008», Sosnovize, Poland.

2008-09-25    25.09.2008-29.09.2008 participation in work of the 6th International Aerospace Salon «Aviasvit-XXI».

2008-06-26    Participation in the VIII International Universal Whole- and Retail Sale «Kurskaya Korennaya Fair-Exhibition 2008», Kursk, Russian Federation.

2007-12-29    80 years from the formation of the State scientific-production enterprise «Corporation Kommunar»

61070, Kharkov, ul. Grigoriya Rudika, 8
tel/fax: (057) 707-01-72; 315-01-69
e-mail: kommunar@tvset.com.ua
Marketing and sales department:
tel/fax: (057) 757-07-91, 702-95-37
tel: (057) 702-99-49, 702-97-57
e-mail: otd36@tvset.com.ua