1. Facing side walls: from hard combustible plywood with thickness of 10 mm, plastic faced «Manminit» with thickness of 1.3 mm (color on agreement with customer).
2. Internal partition: baffles of hard combustible plywood with thickness of 25 mm, plastic «Manminit» faced from two sides with thickness of 1.3 mm (color on agreement with customer).
3. Furniture in passenger compartment and guard's accommodation:
   • lower and upper berths with elements of mounting and fixing in extreme positions. Boarding berths and backs is fulfilled from vinyl leather-T (color on agreement with customer) ;
   • compartment tables with automatic fixing in vertical and horizontal position;
   • furniture.
4. Furniture in service compartment:
   • cabinet for fridge;
   • cupboard for dishware;
   • cabinet-wash with table cover and sink from stainless steel;
   • armchair for guard.
5. Set of heating pipes guard from low-carbon sheet steel with lacquer-and-paint or powder coating of any color with locks and fixing elements.
6. Set of ceilings made of low-carbon sheet steel and covered with enamel ML-12 of white color or powder coating
7. Set of internal doors. The set includes:
   • two toilet doors;
   • door of passenger compartment (fire rated) fixed in open position;
   • door from passenger compartment to inactive hall (double acting door) fixed in open positions;
   • two doors from tambour to car;
   • sliding doors - in the passenger compartment in the service compartment and guard's compartment.

Due to special mechanism one can be provided smooth, noiseless opening and closing doors, as well as their fixing in extreme positions and their blocking.

All the doors are completed with locks and butts from stainless steel or low-carbon steel with different lacquer-and-paint or powder coating.

For all non-metallic material we have certificates for complying requirements of DSTU 4049-2001 «Main line passenger cars of locomotive traction. Safety requirements».

The set includes:

• four side doors (two left and two right);
• two end doors.

Each door is a framed welded structure from low-carbonate steel. Internal cavities are filled in with hard combustible heat-resisting material.

Structure of doors:

• provides reliability and safe operating conditions;
• provides ease of assembly and maintenance;
• provides noise- and heat insulation;
• prevents from dust and rain ingress into the car;
• is repairable.

All the doors are completed with locks and butts of stainless steel or steel doors with different lacquer-and-paint coating.

In case of placing orders you may refer to the plant «Kommunar-express»