Semi-automats Mode of PDG-315-2 completed with source of welding UAFR to current to 350A are indented for semiautomatic welding of hardware at direct current with steel solid wire with diameter 0,8-1,2 mm in shielding gas and composite environment.

Semi-automat represents a devise of closed type, inside of which double -rolled wire feed gear mechanism of domestic or from abroad manufacture, electromagnetic valve and control board of welding cycle and brake system with Euro-plug.

Steeples control of welding voltage and speed of wire feeding are carried out by front panel; adjustable delay of wire feeding and switching off gas, dynamic engine braking and electronic protection from reboot is carried out by control unit of welding cycle.

Supply of feeding wire mechanism from welding voltage provides with self-regulation of welding cycle.

Semi-automat is completed with pin connection burners and with index «E» are considered to connect burners with European plug.

According to the order semi-automats are completed with welding cables to 25 m long.

Supply voltage*	from arc
Range of welding current*, A	40-315
Range of welding voltage*,V	16-30
Power consumed, W	not more 50
Voltage of idle running*, V	not more 45
Reduced voltage of idle running*, V	12
Welding wire diameter, mm
steel	0,8-1,2
powder	1,2**
Feed rate of electrode wire, m/h	115-700
Dimensions, mm	478x240x223
Weight, kg	9,0
Ambient temperature, °C	-25 to +40
Climatic performance State Standard 15150-69	U3.1
Mechanic performance State Standard 30631-99	M3

* - parameters are provided with source of welding current of UAFR type.
** - for PDG-315-4.

All the production is certified for compliance.

In case of ordering refer to sales department of welding equipment or to our dealers