UAFR-160M is a compact inverter rectifier of welding current.

• manual arc welding by consumable stick electrodes of all types with diameter 2-4 mm (MMA);
• argon-arc welding by nonconsumable electrodes (TIG);
• machine arc welding by steel solid wire with diameters 0,8-1,0 mm in carbon dioxide environment (MAG).

• easy ignition and steady arc burning;
• safe reduced voltage of idle operation;
• stabilizing welding current or voltage;
• welding in any attitude position;
• minimal metal spattering;
• deep root penetration with forming fine-grain structure and crater welding;
• regulating bending parameter from steeply-falling (TIG) to flatly-falling (MMA);
• noncontact arc firing at switching oscillator;
• automatic selection of MAG mode at switching semi-automat;
• control of welding current or voltage by pointer indicator;
• indication of operation mode;
• reduced power consumption in the process of welding and at idle running.

• remote control;
• protection from thermal overloads;
• protection of welding circuit from short circuit;
• protection from reduced supply voltage.

Supply voltage	220V, 50Hz
Welding current range, A	30-160
Welding voltage range, V	16-24
Power consumed, kW	max 5,5
Idle running voltage, V	65-90
Reduced idle running voltage, V	max 12
Welding current
at SV 60%, A	160
at SV 100%, A	100
Dimensions, mm	600x280x386
Ambient temperature, °C	-25 to +40
Climatic performance	UЗ.1
Electric safety class	01
Device protection degree	1P22

All the production is certified for compliance.

In case of ordering refer to sales department of welding equipment or to our dealers