Compact inverter rectifier of welding current provides:

• argon-arc welding by nonconsumable electrodes (TIG);
• machine arc welding by steel solid wire with diameters 0,8-1,0 mm in carbon dioxide environment (MAG);
• easy ignition and steady arc burning;
• safe reduced voltage of idle operation;
• stabilizing welding current or voltage;
• welding in any attitude position;
• minimal metal spattering;
• deep root penetration with forming fine-grain structure and crater welding;
• regulating bending parameter from steeply-falling (TIG) to flatly-falling (MMA);
• noncontact arc firing at switching oscillator;
• crater welding;
• automatic selection of MAG mode at switching semi-automat;
• control of welding current and voltage by pointer indicator;
• indication of operation mode;
• remote control;
• protection from thermal overloads;
• reduced power consumption in the process of welding and at idle running;
• protection from reduced and increased supply voltage, phase control;
• electric safety class 01;
• protection degree of device ІP22, welding connectors ІP23;
• welding circuit protection from short circuit.

Supply voltage	380V, 50Hz
Welding current range, A	30-200
Welding voltage range, V	16-24
Power consumed, kW	7
Idle running voltage, V	70-80
Reduced idle running voltage, V	max 12
Welding current
at SV 60%, A	200
at SV 100%, A	120
Efficiency, %	min 80
Dimensions, mm	600x280x386
Weight, kg	50
Ambient temperature, °C	-25 to +40
Climatic performance	U3.1
Operation mode	MMA/MAG/TIG

All the production is certified for compliance.

In case of ordering refer to sales department of welding equipment or to our dealers