Compact inverter rectifier of welding current provides:

• manual arc welding by consumable stick electrodes of all types with diameter 2-6 mm (MMA);
• argon-arc welding by nonconsumable electrodes (TIG);
• machine arc welding by steel solid wire with diameters 0,8-1,4 mm in carbon dioxide environment (MAG);
• supply semi-automats from auxiliary power supply with voltage 26 V or 32 V 50 Hz and supply of gas heater with voltage 36V, 50Hz, 2A;
• easy ignition and steady arc burning;
• safe reduced voltage of idle operation;
• stabilizing welding current or voltage;
• welding in any attitude position;
• minimal metal spattering;
• deep root penetration with forming fine-grain structure;
• regulating bending parameter from steeply-falling (TIG) to flatly-falling (MMA);
• non-contact arc firing when switching oscillator;
• crater welding;
• automatic selection of MAG mode at switching semi-automat;
• control of current and voltage with two pointer indicator;
• indication of operation modes;
• remote control;
• protection from thermal overloads;
• reduced power consumption while welding at idle running;
• protection from reduced and increased supply voltage, phase control;
• electric safety class 01;
• protection degree of device 1P22, welding connectors 1P23
• protection of welding circuit from short circuit.

Operation mode	MMA/MAG/TIG	MAG
Supply voltage	380V, 50Hz	380V, 50Hz
Welding current range, A	40-315	40-350
Welding voltage range, V	22-33	16-34
Power consumed, kW	15	15
Idle running voltage, V	70-80	35-40
Reduced idle running voltage, V	max 12	max 12
at SV 60%, A
at SV 100%, A	315	350
at SV 100%, A	200	220
Efficiency, %	min 80	min 80
Dimensions, mm	600x280x562	600x280x562
Weight, kg	50	50
Ambient temperature, °C	–25 to +40	–25 to +40
Climatic performance	U3.1	U3.1

All the production is certified for compliance.

In case of ordering refer to sales department of welding equipment or to our dealers