Compact inverter rectifier of welding current provides:

• failing parameters with slope adjustment for manual arc welding by consumable stick electrodes of all types with diameter 2-5 mm (MMA);
• rigidity characteristics for machine arc welding by steel solid wire with diameters 0,8-1,2 mm in carbon dioxide environment (MAG);
• easy ignition and steady arc burning;
• safe reduced voltage of idle operation;
• stabilizing welding current or voltage;
• welding in any attitude position;
• minimal metal spattering;
• remote control;
• protection of welding circuit from short circuit;
• protection from thermal overloads;
• reduced power consumption in the process of welding and at idle running;
• protection from reduced and increased supply voltage, phase control;

Supply voltage (A, B, C,O), V	380V, 50Hz
Welding current range, A	40-315
Welding voltage range, V	16-30
Power consumed, kW	13
Idle running voltage, V	to 90
Reduced idle running voltage, V	not more 12
Welding current, A
at SV 60%	315
at SV 100%	200
Coefficient of efficiency, %	not less 80
Welding type	MMA/MAG
Dimensions, mm	587x275x487
Weight, kg	45
Ambient temperature, °C	-25 to +40
Climatic performance on State Standard 15150-69	U3.1
Mechanic performance on State Standard 30631-99	M3
Electric safety class on State Standard 12.2.007.0-75	01
Device protection degree on State Standard 14254-96	IP22

All the production is certified for compliance.

In case of ordering refer to sales department of welding equipment or to our dealers