Compact inverter rectifier of welding current provides:

• manual arc welding by consumable stick electrodes of all types with diameter 2-5 mm (MMA);
• argon-arc welding by nonconsumable electrodes (TIG);
• in complex with semi-automat it provides machine arc welding by steel solid wire with diameters 0,8-1,4 mm in carbon dioxide environment (MAG);
• easy ignition and steady arc burning;
• safe reduced voltage of idle operation;
• stabilizing welding current or voltage;
• welding in any attitude position;
• minimal metal spattering;
• regulating bending parameter from steeply-falling (TIG) to flatly-falling (MMA);
• non-contact arc firing when switching oscillator;
• automatic selection of MAG mode at switching semi-automat;
• control of current and voltage with two pointer indicator;
• remote control;
• protection of welding circuit from short circuit.
• protection from thermal overloads;
• reduced power consumption while welding at idle running;
• protection from reduced and increased supply voltage, phase control.

Supply voltage, V	380V, 50Hz
Welding current range, A	40-315
Welding voltage range, V	16-30
Power consumed, kW	not more 13
Idle running voltage, V	to 90
Reduced idle running voltage, V	not more 12
Welding current, A
at SV 60%	315
at SV 100%	200
Coefficient of efficiency, %	not less 80
Welding type	MMA/MAG/TIG
Dimensions, mm	587x275x487
Weight, kg	45
Ambient temperature, °C	–25 to +40
Climatic performance on State Standard 15150-69	U3.1
Mechanic performance on State Standard 30631-99	M18
Electric safety class on State Standard 12.2.007.0-75	01
Device protection degree on State Standard 14254-96	IP22

All the production is certified for compliance.

In case of ordering refer to sales department of welding equipment or to our dealers